New systems and replacements
AC Installation & Replacement in Chandler, AZ
An old system that keeps breaking, can't keep up in July or still runs on R-22. Call and you are connected with an independent installer that serves Chandler.
- No obligation to hire
- Independent local HVAC contractors
- For homeowners in Chandler and nearby
AC out or blowing warm air? Speak to a local AC contractor now.
You are connected with an independent heating and cooling contractor that serves your area.
Call (928) 543-0990Tap to call from your phone. Calls may be recorded. See our referral disclosure and privacy policy.
Replacing an AC is a sizing job, not just a swap
Central air in the desert works harder and wears out sooner than in milder climates. When a system needs a compressor, a coil or regular refrigerant top-ups, the repair bill starts to look like a down payment on a new one, especially if it is old enough to use R-22, which is no longer produced.
A proper replacement starts with a load calculation for your house, not the size printed on the old unit. Since 2023 the Southwest has had its own, higher federal efficiency minimums for new central air conditioners, and newer systems use lower-impact refrigerants such as R-454B and R-32. A good installer explains those choices plainly and quotes the whole job, including the indoor coil or air handler, line set, electrical and permit.
Before you call
What to check first
- Find the age of the current system. The manufacture date is usually on the outdoor unit's data plate or in the serial number.
- Gather your recent repair bills and notes on rooms that never cool well. They help the installer size the new system.
- Ask your electric utility, SRP or APS, whether any rebates currently apply to the system you're considering.
- Get more than one quote, and make sure each covers the same scope.
- Ask whether a city permit is needed and who pulls it.
What a good replacement includes
What a heating and cooling contractor should do, so you know what to expect and what to ask.
Load calculation
Sizing based on your home's insulation, windows, orientation and ductwork, not the old unit's label.
Matched equipment
Outdoor unit, indoor coil or air handler and thermostat that are designed to work together.
Duct check
A new system can't fix leaking or undersized ducts. The installer should look at them and tell you.
Electrical and refrigerant lines
Correct breaker and disconnect, and line sets cleaned or replaced to suit the new refrigerant.
Permit and paperwork
Replacement usually needs a permit. You should get the warranty registration and model numbers.
Commissioning
Refrigerant charge, airflow and temperatures checked after installation, not just switched on.
How it works
From your call to a working system
We don't run our own crews. When you call, we connect you with an independent local heating and cooling contractor that serves your area. They diagnose the system, give you the price and do the work.
Call
Tell us about the current system and the house. We connect you with an independent installer that serves your area.
Home visit and quote
The installer measures, sizes and quotes options. You decide, with no obligation.
Installation
Old equipment out, new equipment in, usually in a day for a straightforward swap.
Start-up and checks
The system is tested and you are shown the thermostat, filter and warranty details.
Costs
AC Installation & Replacement: typical planning ranges
| Job | Typical planning range | What moves the price |
|---|---|---|
| Split-system AC replacement (outdoor unit and indoor coil) | $7,000 – $14,000+ | Size, efficiency, brand, line set and electrical |
| Heat pump system replacement | $8,000 – $16,000+ | Size, efficiency, air handler, ductwork changes |
| Rooftop packaged unit replacement | $8,000 – $15,000+ | Crane, roof curb, size and efficiency |
Typical planning ranges for common jobs, not quotes, local averages or price guarantees. The contractor prices your job after looking at the system; equipment size, brand, refrigerant type and access all change the figure.
Questions
AC Installation & Replacement: common questions
How long does an AC last in Arizona?
Often less than in milder climates because of the long cooling season. Many systems are replaced somewhere between 10 and 15 years, depending on maintenance, installation quality and how hard they run.
Can I replace just the outdoor unit?
Sometimes, but mismatched indoor and outdoor parts can lose efficiency and warranty coverage, and a refrigerant change usually requires a matched system. Ask the installer to explain the trade-off.
Is a bigger unit better?
No. An oversized system cools in short bursts, wears faster and leaves the house clammy. The right size comes from a load calculation.
Related
Other heating and cooling help
Emergency AC Repair
AC dead, blowing warm or tripping the breaker in the middle of summer. Get a contractor looking at it.
Refrigerant Leak Repair
Low refrigerant means a leak somewhere. Find it and fix it instead of topping up every summer.
Heat Pump Repair
One system, two jobs. When it won't switch modes, won't heat or won't cool.
Also serving nearby communities
Besides Chandler itself, calls are taken from these nearby communities.
AC not keeping up?
Talk to an AC contractor today
Call and you are connected to an independent AC contractor who serves Chandler, Gilbert, Sun Lakes, Queen Creek and Ahwatukee.
AC out or blowing warm air? Speak to a local AC contractor now.
You are connected with an independent heating and cooling contractor that serves your area.
Call (928) 543-0990Tap to call from your phone. Calls may be recorded. See our referral disclosure and privacy policy.